Foam Products Line Of Underlayments:
 
 
 
BEST 
 
Silencer LVT
  Eco Ultimate Silencer
  Eco Silencer HD FOF
 
 
 
BETTER 
 
Eco Silencer +
  Silencer SR Blue
  Silencer SR Pink
 
 
 
GOOD:  
 
Eclipse II 
 
 
 
BASE:  
 
Premium PE Foam 
 
 
 
 | 
  |   |   | 
  
 
     |   | 
   
   
   
   
     |   | Premium PE Foam Underlayment For Laminate and  Floating Wood Floors with Moisture Barrier |   
   
   
   
- The moisture barrier film and tape strip combine to lock out moisture and allow for quick and easy installation
 
 
- Provides cushioned comfort under laminate and floating wood floors
 
 
- Eliminates minor subfloor imperfections
 
 
- Suitable for use with radiant heat flooring systems
 
 
- 100% recyclable, environmentally friendly
 
 
- Naturally resistant to mold and mildew
 
 
- Non allergenic and odorless 
  
 |   
  
   
  
APPROVED SUBSTRATES
- Dry, completely cured concrete (at least 14 days old with HVAC operating) 
 
 
- 3/4" interior plywood or OSB flooring 
 
 
- Waterproofing and crack-isolation membranes 
 
 
- Cement backer units 
  
   
FLOOR PREPARATION 
- Subfloor should be clean and dry 
 
 
- In geographic areas where concrete subfloors are subject to excessive moisture, a calcium chloride moisture test is required. Vapor emission readings in excess of 3 lbs. per 1,000 square feet in 24 hrs will require additional protection such as concrete sealant or polyethylene sheeting. 
  
   
QUICK AND EASY INSTALLATION
 requires no additional seaming tape, cuts with a knife    
- Roll out underlayment with tape strip next to wall. Roll out next row in same manner butting underlayment close to first row ( do not overlap ) and covering the moisture barrier film. Remove the tape strip and secure the overlapping moisture barrier film. 
 
 
 
- Install flooring according to the manufacturer's installation instructions 
 
*NOT for glue down installations   
   
PACKAGING
 Available in 4' x 25' (100 sq. ft.) rolls and 4' x 250 (1000 sq. ft.) contractor size rolls 
   
TECHNICAL DATA
 100% polypropylene closed cell foam
 Thickness — .080" 
 Weight — 2 lbs. per roll 
 Moisture Barrier — with lip and tape sealing system 
   
SOUND ABSORPTION PROPERTIES
 Impact Insulation Class (IIC) This method is to measure the impact sound transmission performance of a  floor-ceiling assembly (sound transmission through the floor)
 
| IIC | Flooring | Sub-Floor |  
| 61 | Laminate/Engineered Wood | 6" concrete with ceiling assembly  |  
| 54 | Laminate/Engineered Wood | wood joist with ceiling assembly  |   
 
 | 
  
 |